Product Description SOLAR MODULES
and create more power in peak hours
increase the power output and mechanical strength of
solar module
ensures dependable performance, even through harsh weather conditions,
lightweight, and pre-drilled mounting holes for easy installation
commercial, and industrial use Open circuit voltage: 43V Short circuit current: 5.81A Rated current: 7.58A Rated voltage: 33V Power output tolerance: +/-5% Maximum system voltage: 1, 000V Dimension: 1, 946 x 992 x 50mm Working temperature: -40 to 90 Model: 75W - 250W
Mono-crystalline
solar panel (HY-M165W, 170W, 175W) Maximum
power: 165W, 170W, 175W Maximum
power voltage: 34.6V, 35.2V, 35.2V Short
circuit current: 5.04A, 5.14A, 5.20A Open
circuit voltage: 43.6V, 43.8V, 44.2V Maximum
power current (A): 4.74A, 4.83A, 4.95A Size: 1580*808*35mm Product Description and create more power in peak hours increase the power output and mechanical strength of
solar module ensures dependable performance, even through harsh weather conditions,
lightweight, and pre-drilled mounting holes for easy installation commercial, and industrial use Open circuit voltage: 43V Short circuit current: 5.81A Rated current: 7.58A Rated voltage: 33V Power output tolerance: +/-5% Maximum system voltage: 1, 000V Dimension: 1, 946 x 992 x 50mm Working temperature: -40 to 90 Model: 250W |       |
Product Description LED LIGHTS LED uses solid semi-conductor as lightening materials. It
has many advantages such as high lightening efficiency, low power consumption, long life-span, security, quick response, environment-friendly, low operation
temperature, etc. Under the same brightness condition, the power consumption is
as much as 1/10 of incandescent lamp, 20 times of fluorescent lamp, but the life-span is as long as 50 times of incandescent lamp, 20times of fluorescent
lamp. So it is trend that LED light will instead of conventional lights. Solar Module (5-300W)
Product
Description Solar cells
in the main function of conversion of light into electricity, the phenomenon
known as the photovoltaic effect. Among the more sunlight batteries generally
more practical and there are mono crystalline silicon solar cells,
polycrystalline silicon solar cells and solar cells, three amorphous silicon. |   |
Product Description
Vertical
Axis Wind Turbine System (200W-200KW) Product
Description Vertical
Axis Wind Turbine Generator We can
supply Vertical Axis Wind turbines from 200W to 200KW. The vane is made on the
principle of the wing of the aircraft while the structure is made on the principle
of vertical whirlwind which is of the advantage of no influence caused by the
wind direction. This efficiency of electric energy production is 18% higher
than the horizontal whirlwind generator being used at present. This system is
of a position-fixed system; hence the electricity transmission wire will not be
stranded in operation. Such system is of a silent Vertical Axis Wind Turbine,
thus makes it possible to be installed at any places including in some bad
locations like on the roof of the house, on the boat, in the snow area and on
the lighthouse and in the sea or river area. Such system is developed to
replace the old system used at present. The old system is of the horizontal whirlwind.
In operation the face of the vane of such old system is heavily pressured by
the strong wind which will easily cause the vane deformed and which will
definitely cause the heavy noise and the reduction of the turn speed and the deficiency
of electric energy production. As a professional manufacturer and exporter, we are mainly supply the domestic wind turbine from 200w-50kw, the JD series wind turbine
from 200w up to 25kw, which are suitable for designing as on-grid system for family using. Numbers of Blade 3
pcs Material of Blade :
Complex Resin Diameter of Wind Rotor 13m Start (out-in) wind speed 4m/s Working wind speed 4-30m/s Rated speed 180
rpm Security wind speed 50m/s Wind energy ratio 45% Generator Three phase
Permanent magnet generator Generator rated power 25000w Max output power 29000w Charging voltage 540Vdc Output voltage of Inverter Single
phase 220-240Vac/50HZ 110-130Vac /60HZ Three Phases 380-415Vac/60HZ Stop method by
manual brake and electromagnet control Wind direction tracking method By Tail-vane yawing Speed adjustment method By
Tail-vane and servo motor adjustment Protect method intelligent
control full-automatically Tower type Galvanized
tapered tower with installation round fence and ladder Tower height & weight 15m/3200kgs
(for tapered tower) Charging control intelligent
control full-automatically Inverter power supply pure
sine wave
120 pcs 12Vdc-200AH Lead-acid or colloid
batteries (against the condition of wind
source at installation site) Grid tied inverter matching Input:
540Vdc Output: 240Vdc Recommend: 30kw on-grid inverter Time of charging (off-grid type) About 20 hours Annual power generation About
74500 KWH (annual average wind speed above 7.5m/s ) Packing details Total packages 12pkgs Total N.W / G.W 4400kgs
/ 4500kgs Total Volume 16.6CBM Model: JD Standard: Horizontal Axis
Wind &
Solar Turbine (SW-WP) Product
Description HY--1500W
with the tower on grid Technical parameter Rated
power(W) 1500 Material of the blades Reinforced fibber glass Rated wind
speed(m/s) 9 Speed regulation method Yawing and electric magnet Startup
wind speed(m/s) 3 Generator style 3-phase AC PM Working
wind speed(m/s) 3~25 Tower height (m) 6 Survived
wind speed(m/s) 50 Stop method
Brake by hand drag Rated
rotate speed (r/min) 360 Main machine weight(kg) 120 Rotor
Diameter(m) 3.2 Dragline steel tower weight(kg) 50 Working
voltage(v) DC48V/240/AC220V Independent tower weight (kg) 180 Wind
Generator (HY-1500W) Product
Description HY--1500W
with the tower on grid Technical parameter Rated power
(W) 1500
Material of the blades Reinforced
fibber glass Rated wind speed
(m/s) 9
Speed regulation method Yawing
and electric magnet Startup
wind speed (m/s) 3 Generator style 3-phase AC PM Working
wind speed (m/s) 3~25 Tower height (m) 6 Survived
wind speed (m/s) 50 Stop method
Brake by hand drag Rated
rotate speed (r/min) 360 Main machine weight(kg) 120 Rotor Diameter
(m) 3.2
Dragline steel tower weight(kg)
50 Working voltage (v) DC48V/240/AC220V Independent tower weight (kg) 180 Product Description As a professional manufacturer and exporter, we are mainly supply the domestic wind turbine from 200w-50kw, the JD series wind turbine
from 200w up to 25kw, which are suitable for designing as on-grid system for family using. Numbers of Blade 3
pcs Material of Blade :
Complex Resin Diameter of Wind Rotor 13m Start (out-in) wind speed 4m/s Working wind speed 4-30m/s Rated speed 180
rpm Security wind speed 50m/s Wind energy ratio 45% Generator Three phase
Permanent magnet generator Generator rated power 25000w Max output power 29000w Charging voltage 540Vdc Output voltage of Inverter Single
phase 220-240Vac/50HZ 110-130Vac /60HZ Three Phases 380-415Vac/60HZ Stop method by
manual brake and electromagnet control Wind direction tracking method By Tail-vane yawing Speed adjustment method By
Tail-vane and servo motor adjustment Protect method intelligent
control full-automatically Tower type Galvanized
tapered tower with installation round fence and ladder Tower height & weight 15m/3200kgs
(for tapered tower) Charging control intelligent
control full-automatically Inverter power supply pure
sine wave 120 pcs 12Vdc-200AH Lead-acid or colloid
batteries (against the condition of wind
source at installation site) Grid tied inverter matching Input:
540Vdc Output: 240Vdc Recommend: 30kw on-grid inverter Time of charging (off-grid type) About 20 hours Annual power generation About
74500 KWH (annual average wind speed above 7.5m/s ) Packing details Total packages 12pkgs Total N.W / G.W 4400kgs
/ 4500kgs Total Volume 16.6CBM Model: JD Standard: Horizontal Axis |                  |
Solar Hot
Water (SW-TS) Product
Description Description: Vacuum
tube: 58-1800mm high borosilicate 3.3 glass vacuum tube with tube wall
thickness of 1.6mm. Inner tank
material: SUS304-2B Stainless Steel with thickness Outer tank
material: Color powder coating steel / Stainless steel Frame
material: Galvanized steel plate with thickness of 1.5mm Capacity of
water tank: 200L, 240L, 300L, 360L 40L/person for Max consumption Cooper
coil: With dia of 12mm and wall thickness of 1.0mm Cooper coil
length : 200L for 30m, 240L & 300L
for 35m, 360L for 40m. Heat
preservation layer: High pressure automatic polyurethane foaming layer with
thickness of 55mm Heat
preservation hours: 48-72 hours Hailstone
resistance: Dia.≤25mm Optional
accessories: Electrical heater
Independent
Solar Home Power system Solar
energy house power supplies are low AC/DC power designed to meet the current
market demands, integrating the functions of solar energy haring;
Charging/discharging control and inverting these device are equipped with
perfect controlling and protection functions and adopt humanistic designing for
operation. They are featured in their simple structures and reliable
performance. The input voltage of the system is DC12V and output voltage is AC
220V and DC 12V. This product is mainly applied to the areas with shortage of
electricity supply. With a solar energy generating low-power AC/DC power
supply, this system is able to meet the power demands for daily livelihood,
such as lights, televisions, VCD players, radios and computers, etc. Solar
energy collector: 10W~300W (imported multi-crystal silicon solar energy cells) Accumulator
cells: 12V12AH~300AH (maintenance-free lead-acid cell) Load:
3W~450W Controlling
system: Controllers with specialized for solar energy devices; Working
time: 4~6hrs/day, power supply uninterrupted even after 3 rainy or cloudy days; Temperature
range: -30C ~65C; Protection
functions: Low-voltage protection, restore from low voltage, excessive voltage
protection, excessive voltage restore, reversed hook-up protection, overload
protection, short circuit protection and temperature compensation; The entire system may accord the customer request design;
SOLAR WATER
HEATING Home |
Solar Water Heating Water heating is an easy and low cost way to use solar energy. There are different types of systems to use for domestic use (such as showers and baths, washing dishes and clothes, etc), swimming pools, spas and hot tubs. Full Circle Solar sells and installs the Progressive Tube collector made by Thermal Technologies Corporation. This 40 gallon passive solar water heater is a self-contained unit that acts as collector and storage in one piece of equipment. The all copper collector has a selective surface coating, double glazing and a 10-year manufacturer’s warranty. |          |
Balcony
Style Solar Water Heater Product
Description 1) High
efficiency solar collector using heat pipe evacuated tubes 2) Able to
be used in all climates 3) Reliable
and efficient with twin-glass solar tubes 4) Copper
heat pipes for rapid heat transfer 5) Easy
plug-in installation for mounting on roof, balcony or at ground level 6) Free
maintenance 7) Suitable
for pressure water (8 bars / 116PSI) 8)
Corrosion resistant silver brazed copper header 9) Frame
material: 304 2B grade standard steel 10) Casing
material: 304 BA or AB stainless steel 11)
Excellent insulator in polyurethane foam 12)
Collectors be connected in series to increase water heating capacity 13) Tubes
easily replaced if broken, can be used with broken tubes 14) Ideal
for commercial solar water heating applications 15) Can be installed on the balcony or windows Product
Description Inner tank:
Food Grade Stainless Steel by argon protect welding, supply water quality and
drinkable Outer
shell: Galvanized Steel coated noncorrosive layer Heat
insulation layer: 50-60mm import polyurethane integral foaming Frame:
Galvanized Steel coated noncorrosive layer, both install inclined and flat
roof. |      |
Solar
Traffic Signal Lights Product
Description Solar
traffic signal lights may be directly used without the need of laying wires or
trenching road. These lights, characterized by windproof, rainproof and
anti-hail. They are mainly used in urban and rural road crossings and
intersections as traffic signal or safety warning device for slow motion at
road crossings
Solar Traffic Signal
Light (SSL-001) TRAFFIC LIGHTS Product Description Body materials: Al and
reflective material Solar panel: Mono or
polycrystalline silicone Power: 5 to 10W Lead-acid battery:
12V/7 to 17Ah Controlled by sunlight
or all weather blinking Size: 600, 800 and 1,
000mm Also can be made
according to customer's requirement Solar panel: Mono or
polycrystalline silicone |        |
Solar
Tracker System Description:
The
tracking solar housing is made up of east-west level azimuth and vertical
elevation dual-axle automatic tracking system, so that it will keep the whole
solar array tracking the sun accurately, and make the sun vertical with solar
panels, in order to gain most sunshine and produce more power. The
mechanical transportation part is made up of east-west level azimuth and
vertical elevation with small driving clearance, high intensity accuracy and
high deceleration ratio to ensure the firm and accuracy of the whole system.
Because of high deceleration ratio of speed reducer, it decreases a lot of the
drive power of engine, the power consumption of azimuth and elevation angle
driving engines are less than 1 WP, which is 1/1000 of the power generation of
power station. So it can be ignored. For the power station turns 180 per day
from east to west, and it will turn back to the east during the night, that is
to say, it only turns one lap per day. With the small abrasion of reducer, the
designing life-span of whole speed reducing system is 20 years, so that the
mechanical life-span of solar station will be higher. The dual axis tracking
housing is made up of high precision sun displacement detector controller tracking
machine cross beam bracket for solar module installation. 'Polar
mount', construction for an ideal single-shaft tracing of the solar circle. Motor
turning up to 100°, which means almost 8 hours of perpendicular tracing of the
sun. Motor Shaft
length: 560mm Max
dimensions of a solar panel: 1.15m x
0.8m of aluminum structure, made for panels up to 1m2 in area Max weight
of a solar panel: 20kg under the condition that the solar cell is turning
through the center of gravity. Dimensions
of package: 1175L x 135W x 200H Weight: 8kg Max safe wind speed: <160km/h |       |
Solar
Module System Product
Description Independent
Solar Home Power system Solar
energy house power supplies are low AC/DC power designed to meet the current
market demands, integrating the functions of solar energy haring;
Charging/discharging control and inverting these device are equipped with
perfect controlling and protection functions and adopt humanistic designing for
operation. They are featured in their simple structures and reliable
performance. The input voltage of the system is DC12V and output voltage is AC
220V and DC 12V. This product is mainly applied to the areas with shortage of
electricity supply. With a solar energy generating low-power AC/DC power
supply, this system is able to meet the power demands for daily livelihood,
such as lights, televisions, VCD players, radios and computers, etc. Solar
energy collector: 10W~300W (imported multi-crystal silicon solar energy cells) Accumulator
cells: 12V12AH~300AH (maintenance-free lead-acid cell) Load:
3W~450W Controlling
system: Controllers with specialized for solar energy devices; Working
time: 4~6hrs/day, power supply uninterrupted even after 3 rainy or cloudy days;
Temperature
range: -30C ~65C; Protection
functions: Low-voltage protection, restore from low voltage, excessive voltage
protection, excessive voltage restore, reversed hook-up protection, overload
protection, short circuit protection and temperature compensation; The entire
system may accord the customer request design; |     |
Product
Description STREET
LAMPS FEATURES: 1. Solar Battery: Imports of high-performance
silicon solar PV 2. Operating Voltage: DC 12V_24V_36V-48V 3. Accumulator: Maintenance-free
battery 4. Luminaries: LM series of high-performance
integrated high-power LED(suitable for different height, Service life of 20
years ) 5. Control System: LM series of micro-controller
of Smart Pulse 6. Lighting time: 10- 14hours / day (Can be
adjusted) 7. Height of lamp: 3M\4M\5M\6M\7M\8M\9M\10M\11M\12M\13M\14M; |        |
Mounts for Solar Electric Panels     |     |
10 KW WIND
POWER GENERATORS The ARE442
wind generator is rated at 10 Kw at 25 mph wind speed. This machine comes in
two models: Net-metering, or 48 volt battery charging (please select below).
For Net-metering loads over 1,000 Kwh/month this machine is a great choice for
turning your electric meter backward. Rotor
Diameter: 7.2 meters (23.6 feet) Swept Area:
41 square meters (442 square feet) Configuration:
3-Blade upwind with side furling Cut-In Wind
Speed: 2.5 m/s (6 mph) Voltage
Options: 48 VDC or Grid-Tie Tower-Top
Weight: 1,650 lbs Grid-Tie
Wind Generator includes wind turbine, slip rings WB33OOU (10 Kw) inverter,
voltage clamp and diversion load. INCLUDES
5-Year Limited Warranty Tower
Options: 43 feet, 64 feet, 85 feet, 106 feet (not included, must be purchased
separately). Energy
Production: If your
average annual wind speed is 10 mph then this machine would expect to produce,
on average, 1200 Kwh/month. If your
average wind speed is 12 mph, then average energy production is approximately
1800 Kwh/month. If your average wind speed is 14 mph, then average energy production is estimated at 2400 Kwh/month. 3000 Watt
Wind Generator System: Take
advantage of national Net-Metering laws and produce your own electricity
against your electric bill. Using this wind generator as your own personal wind
farm you can produce power and turn your meter backwards. This
complete 3 Kw Wind Power System includes: One (1)
Whisper 500 3Kw wind turbine,48 volt, EZwire system One (1) 47
foot Tower Kit (pipe not included) Four(4)
Sealed Deep Cycle Batteries 255 Ah each One (1)
Xantrex SW4048 Inverter One (1)
Lightning Arrestor Kit includes both AC/DC One (1)
Battery/Inverter Cable Kit One (1)
Lockable battery enclosure One (1)
48" Auger Set This
complete Wind Power System is your Personal Wind Farm. Using all NEC approved
interconnection this complete system allows you to generate your own clean
electricity and put it back into the grid against your bill. This Wind
Power Net-Metering system includes a battery bank to give you power when the
grid goes down in a black out. |    |
Define your
Wind Power Needs: The first step in planning your wind project is to define what type of wind project you want. This may sound pompous, but vital, to define the electrical characteristics of your application. In this chapter we’ll address the issues that define your wind project. Print out these pages to use as a check list to further define your wind power project. |  |
INVERTERS The
inverters below convert the DC power from your Photovoltaic system directly to
the grid. Used world wide for Grid-tie net metering systems, these inverters
are all UL listed and have extensive experience in the field. Grid tie
inverters are a key component to your solar panel electric system or wind power
electric system. Inverters convert DC power generated by solar and wind
electric systems into AC power used by most domestic electrical devices and
your grid tie power inverter will do the same, pumping AC electricity back into
the "grid" and offsetting your power consumption and cash outlay.
Many consumers have the best of both worlds when they install a hybrid independent
electric system in their home. This could mean that they are supplementing
their electric power with solar power panels or a wind turbine system or it
could mean incorporating both to generate enough green energy to power their
home and more. In most of the |     |
   |   |
AH-50KW -
Specifications (50kW) 50KW wind
turbine generator Power 50kw Blade
diameter 18m Rated
Rotated speed 80 Rated wind
speed 11 m/s Rated power
50kw Max power 55kw Output
voltage 380v Start up
wind speed 3.5m/s Operating
wind speed 3-25m/s Security
wind speed) 50m/s Height of
tower 25m Weight of
top section 2050kg Tower pole
type 800steel tube*10mm Output control
system Charge controller inverter Blades Fiber glass Capacity
and quantity of battery (reference) 12V200AH Can supply
power for: Village, air conditioning,
refrigerator, washer, water pump, electric rice-cooker, color television,
illumination, electric fan, charge | |
 |   |
SOLAR POWERED
STREET LIGHTS Solar
powered street lights represent the perfect illustration of current
technological potential of solar energy. This low-cost, environmentally sound
and easy to install method of street lighting is now beginning to be adopted by
more and more Canadian and American communities. Solar power
is recognized, as being an environmentally, safe and ‘clean’ form of energy
production, but let us examine the concept in more specific detail. The basic
unit for producing energy is obviously the solar panel itself, which is the
means by which the energy given out by the sun is converted into electricity.
We are all familiar with quite large solar panels, for domestic or industrial
use, but the technology has advanced to such an extent that there are currently
many different sizes and power outlets available for all our needs.    |       |
System
Includes: Solar
Panel: ND-224 Watt Inverter
included- SB 7000 High-power
module (224W) using 156 mm square polycrystalline silicon solar cells with
13.74% module conversion efficiency Sharp's
advanced surface tincturing process increase light absorption and efficiency
while providing a more subdued, and natural look Bypass
diode minimizes the power drop caused by shade Water
white, tempered glass, EVA resin, and a weatherproof film, plus aluminum frame
for extended outdoor use. UL
Listings: UL1703, CUL Sharp
modules are manufactured in ISO 9001 certified facilities 25-year
limited warranty on power output Cell:
Poly-crystalline silicon No. of
Cells and Connections: 60 in series Open
Circuit Voltage (Voc): 36.6 volts Maximum
Power Voltage (Vpm): 29.28 volts Short
Circuit Current (Isc): 8.33 amps Maximum
Power Current (Ipm): 7.66 amps Maximum
Power (Pmax): 224 watts (+10% / -5%) Module
Efficiency (nm): 13.74% Maximum
System Voltage: 600 VDC Series Fuse
Rating: 15 amps Type of
Output Terminal: Lead Wire with MC3 Connector Dimensions
(L x W x D): 64.6" x 39.1" x 1.8" (1640 x 994 x 46 mm) Weight: 44
lbs (20 kg) Modules/Carton:
2 Carton
Size: 65.16" x 39.76" x 4.25" (1655 x 1010 x 108 mm) Pallet
Quantity: 30 pieces per pallet Operating
Temperature (min to max): -40° F to 194°F (-40°C to 90°C) Storage
Temperature (min to max): -40°F to 194°F (-40°C to 90°C) Features: 10-year
standard warranty Improved
CEC efficiency Integrated
load-break rated AC and DC disconnect switch Integrated
fused series string combiner Sealed
electronics enclosure and OptiCool® Comprehensive
SMA communications and data collection options Ideal for
residential or light commercial applications Rugged cast
aluminum outdoor rated enclosure |  |
Surface Pumps The most
economical DC water pumps are surface (non-submersible) pumps. They can reduce
pumping energy consumption by half or more, compared to conventional AC pumps. Surface
pumps can pull the water up to 20 feet (suction capacity) and lift or push up
to 900 feet. Our pumps have a wide range of application and can provide as
little as 0.5 gallons per minute and up to 70 gallons per minute. Surface pumps
must be protected from weather and freezing. Submersible
Pumps Submersible
pumps are used typically used in well pumping applications, however they can
also be placed in a pond or creek, or just about anywhere that allows the pump
to be completely submerged. Submersible
solar powered pumps can be used in pressurized and non-pressurized irrigation,
home water systems and livestock watering. Although
there are no limits to how large a solar-powered water pumping system can be
built, deep well applications can require quite a large number of solar panels.
The further you need to lift water, the more power that the DC pump will
require. For applications with very little lift or low flow requirements, low
cost solutions are abundant. Rooftop
flush mount racking with Pro-Solar rails, 3" Fast-Jack standoffs, splices,
& top-clamps Kit price
includes: PV modules with MC cables; asphalt shingle roof flush mount racks as
listed; grounding washers & lugs; MC extension cable(s) & clips; DC com
biners, disconnects, and break ers as required. |   |
